Silicone products are widely used in our daily life,from kitchenware to medical equipment.However,the sticky mold problem often occurs during the production process,which affects the quality and efficiency of production.Here we will discuss some effective methods to solve the sticky mold problem of silicone products.

Proper mold release agent

The mold release agent is the essential factor in preventing the silicone product from sticking to the mold. However,not all mold release agents are suitable for silicone products.Some release agents may react with silicone and leave a residue,which causes stickiness.Therefore,it is essential to choose the appropriate mold release agent for silicone products.For example,some silicone-based release agents are specifically designed for use with silicone rubber and don't leave any residue.

Proper curing time and temperature

The curing time and temperature can significantly affect the stickiness of silicone products.If the curing time is too short,the silicone product may not fully cure,resulting in stickiness.On the other hand,if the curing time is too long,the silicone product may over-cure and become too firm,which can also cause sticking.Therefore,it is crucial to follow the recommended curing time and temperature for silicone products.

Proper mixing ratio of silicone materials

The mixing ratio of silicone materials is essential for achieving the desired hardness and properties of the silicone product.If the mixing ratio is incorrect,the product may not cure properly or may be too firm,which can cause sticking.Therefore,it is important to carefully measure and mix the silicone materials according to the manufacturer's instructions.

Proper storage of silicone materials

Silicone materials can absorb moisture from the air,which can affect their performance and cure time. Therefore,it is crucial to store silicone materials properly to prevent moisture absorption. The silicone materials should be stored in a dry and cool place,away from direct sunlight and moisture.

The sticky mold problem can be solved by using appropriate mold release agents,following the recommended curing time and temperature,properly mixing the silicone materials,and storing the materials properly.By implementing these methods,we can improve the production efficiency and quality of silicone products.